There will be a few items that would come with your device. I will go into detail of each item, and why you would need it. The idea is to provide you with everything you need to get up and running without you having to buy anything else.
Device
Obviously, you would get the reader or tablet. This is the reason you made the purchase. With that said, you would get the device, and when buying the tablet, you would also get a stylus. The stylus is passive so it doesn’t require power. The screen will detect the pressure. This is only available on the tablet though.
MicroSD card + Eject Tool
You would get a 64GB? microSD card with an eject tool. You would use the eject tool to eject the tray. You would insert the microSD card into the tray. If you acquired a P Series device, you can insert your nanoSIM? data card in here as well. Once you added the card(s), you will reinsert the tray into the device, and boot up your device.
USB-C Cable
This cable will allow you to sync with a computer, and will also be used for charging. If you have multiple devices, then you might not even need the cable. Since you will use a USB-C thumb drive to load everything, this will be quicker and more efficient of a way to set up your device.
Charging Brick
While USB-C has been around for a while, many bricks are still using USB-A. This is against the philosophy of Senitrus. Instead, you would receive a 40 watt 2 USB-C charging brick. You would plug one end of your cable into the brick, and the other into the device. Once that happens, charging will begin. This will also give you another USB-C port for charging another item such as the device.
Setup Manual
You would receive a small setup manual which walks you through the setup process. It will go from whether you have a Senitrus device other than the reader, creating a new Senitrus ID, or not using a Senitrus ID at all. All of the options will be disclosed in this little packet.